Power Connector Cable - HP Pavilion 14 Maintenance And Service Manual

Power connector cable

Description
Power connector cable
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Bottom cover (see
b. Battery (see
c. Hard drive (see
d. Fan (see
e. System board (see
Remove the power connector cable:
1. If necessary, rotate the left display hinge upward.
2. Disconnect the power connector cable from the system board (1).
3. Remove the cable from the computer (2).
Reverse this procedure to install the power connector cable.
70 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 36)
Hard drive on page
Fan on page 61)
System board on page
33)
47)
66)
Spare part number
L19162-001