Fingerprint Reader Assembly - HP Pavilion 14 Maintenance And Service Manual

Fingerprint reader assembly

Description
Fingerprint reader assembly, natural silver (includes bracket)
Fingerprint reader assembly, rose gold (includes bracket)
Before removing the fingerprint reader assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the fingerprint reader assembly:
1. Lift the plastic bracket out of the computer (1).
2. Disconnect the cable from the system board ZIF connector (2).
3. Remove the fingerprint reader module and cable from the computer (2).
Reverse this procedure to install the fingerprint reader assembly.
60 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 36).
33).
Spare part number
L19163-001
L19164-001