●
Memory modules (see
Heat sink (see
Heat sink on page
●
Remove the system board:
1.
Disconnect the following cables:
(1) Fingerprint reader cable
(2) Power connector cable
(3) Display cable
(4) Hard drive cable
(5) Backlight cable
(6) Keyboard cable
(7) Speaker cable
(8) USB board cable
(9) Card reader cable
(10) TouchPad cable
2.
Remove the five Phillips M2.0×4.0 screws (1) that secure the system board to the computer.
3.
Remove the two Phillips M2.0×2.0 screws (2) that secure the system board to the computer.
Memory module on page
63)
53)
Component replacement procedures
67