Card Reader Board - HP Pavilion 14 Maintenance And Service Manual

Card reader board

Description
Card reader board
Card reader board cable
Before removing the card reader board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the card reader board:
1. Disconnect the cable from the ZIF connector on the system board (1).
2. Remove the Phillips M2.0×2.0 screw (P0 driver) (2) that secures the board to the computer.
3. Remove the board from the computer (3).
Reverse this procedure to install the card reader board.
Bottom cover on page
Battery on page 36).
33).
Component replacement procedures
Spare part number
L19154-001
L19155-001
55