On-Screen Display Menus; Using The Menu; Main Menu - Runco Reflection Owner's Operating Manual

INFO
ENTER
EXIT
Press the Menu button to turn on/off the OSD menu.
•
NOTE: If the Main Menu is displayed, you can also press Exit to turn it off.
• Use the arrow buttons (▲,◄,▼,►) to select items in the menu or to make various
adjustments.
Press Enter or ► to select an item to change, or press Exit to leave and save the
•
setting of items in the menu.
Runco CL-610
> Video
S-Video
Component1
Component2
RGB-HD
HDMI
------------------------
Aspect Ratio
Installation
Option
Set Up
ISF Calibration
When the Menu button is pressed, the Main Menu (shown above) appears on the
screen. Use the ▲ or ▼ button to move to an item, then press Enter to select it.
The active source is indicated by an arrow (>) to the left of the source; in the example
above, Video is the active source. To select a different source, use the ▲ or ▼ button
to highlight it and press Enter or ►.
Runco CL-610 Owner's Operating Manual
This unit is equipped with an on-screen
display (OSD) menu for making adjustments
RVR
and changing settings. There are five menu
languages; see the Language setting under
"Installation" on page 35.
MENU
Source selection and picture quality adjustments
Aspect Ratio selection
Installation selection
Option selection
Setup selection
ISF Calibration selection

On-Screen Display Menus

31

Using the Menu

Main Menu