Remote Control - Runco Reflection Owner's Operating Manual

Controls and Functions

Remote Control

(continued)
MEM1, ISF NIGHT, ISF
DAY, FACT
Recall video memory
sequentially. See "Selecting
Video Memory" on page 28.
0 - 9
Press to type in menu
passcodes.
16
LIGHT
ON OFF
VID S-VID COMP1 COMP2
RGBHD HDMI
INFO RVR
ENTER
EXIT MENU
BRT CONT COL TNT
ISF ISF
MEM1 FACT
NIGHT DAY
ANA
4X3 LBOX VWIDE
16X9
1 2
CINEMA
VCINE
3 4 5 6
7 8 9 0
PBP ACT PIP PIP+
PIP-
FOCUS ZOOM LENS
Runco CL-610 Owner's Operating Manual
CINEMA
Image in Letterbox mode is
enlarged to a 16x9 image
and the upper and lower
portions are compressed.
ANA (Anamorphic)
For 16:9 DVDs.
4X3 (Standard 4:3)
The input signal will be
scaled to fit 4:3 display mode
in the center of the screen.
LBOX (Letterbox)
Image in letterbox format is
enlarged to fit 16:9 full screen
display and the upper/ lower
portions are "blanked off."
VWIDE (VirtualWide)
4:3 image is enlarged NON-
linearly in horizontal direction
to fit 16:9 full screen display.
VCINE (Virtual Cinema)
A 2.35 image is stretched
vertically in both directions to
fill a 16:9 image.
PBP (Picture by Picture)
Enable the PBP function.
ACT (Active)
Switch to the active window
in PIP display mode.
PIP (Picture in Picture)
Enable the PIP function. Use
ARROW keys to adjust the
position of the PIP window.
See "PIP / PBP Function" on
page 29.
PIP+
Enlarge the size of PIP
window.
PIP-
Shrink the size of PIP
window.