Runco Reflection CL-610LT Owner's Operating Manual
  1. Manuals
  2. Brands
  3. Runco Manuals
  4. Projector
  5. Reflection CL-610 CineWide
  6. Owner's operating manual

Runco Reflection CL-610LT Owner's Operating Manual

Runco owner's operating manual dlp projectors cl-610,cl-610lt
Hide thumbs Also See for Reflection CL-610LT:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Operation Manual
O
'
O
M
W N E R
S
P E R A T I N G
A N U A L
CL-610 and CL-610LT
DLP™ Projectors

Advertisement

Table of Contents
loading

Related Manuals for Runco Reflection CL-610LT

Summary of Contents for Runco Reflection CL-610LT

  • Page 1 ’ W N E R P E R A T I N G A N U A L CL-610 and CL-610LT DLP™ Projectors...

  • Page 3: Table Of Contents

    On-Screen Display Menus ... 31 Using the Menu ... 31 Main Menu ... 31 Picture Quality Adjustments ... 32 Aspect Ratio ... 34 Installation ... 35 Option ... 37 Setup ... 39 Runco CL-610 Owner’s Operating Manual Table of Contents...
  • Page 4 Table of Contents (continued) ISF Calibration ... 43 Lamp Replacement ... 45 Troubleshooting ... 47 RS-232 Setup ... 49 Connecting RS-232 to the Projector ... 49 RS-232C Control Codes ... 50 Specifications ... 53 Dimensions ... 55 Runco CL-610 Owner’s Operating Manual...

  • Page 5: Limited Warranty

    PARTS: (Not including the lamp) Runco will provide new or rebuilt replacement parts for the parts that fail due to defects in materials or workmanship for a period of two (2) years from the effective date of delivery to the end user.
  • Page 6 IMPORTANT: WARRANTY REGISTRATION: Please fill out and mail your warranty registration card. It is imperative that Runco knows how to reach you promptly if we should discover a safety problem or product update for which you must be notified.
  • Page 7 ADDITIONAL INFORMATION: To locate the name and address of the nearest Runco Authorized Service Center, or for additional information about this Limited Warranty, please call or write: Attn: Customer Service Department RUNCO VIDEO PRODUCT INFORMATION RETAIN THIS INFORMATION FOR YOUR RECORDS...

  • Page 8: Safety Precautions

    Safety Precautions Thank you for your purchase of this quality Runco video projector! It has been designed to provide you with the quality of video that is expected in a home theater. For the best performance, please read this manual carefully as it is your guide through the menus and operation.

  • Page 9: Overview

    Imaging Science Foundation. These standards provide for superior image quality and assure the user that restoration to preset values for both day and night viewing is accomplished by just the press of a button, should the projector’s settings or calibrations be inadvertently disturbed.

  • Page 10: Front / Top View

    Can be rotated to match floor or ceiling installation. See “Runco Logo” on page 14. 4. Top IR Sensor 5. Status LEDs See “Control Panel” on page 13. 6. Intake Vent 7. Front IR Sensor 8. Projection Lens Runco CL-610 Owner’s Operating Manual...

  • Page 11: Rear / Bottom View

    Runco CL-610 Owner’s Operating Manual 6. Runco Logo Can be rotated to match floor or ceiling installation. See “Runco Logo” on page 14. 7. Lamp Module Cover Remove this cover when replacing the lamp. See “Lamp Replacement” on page 45.
  • Page 12 Overview This page is intentionally left blank. Runco CL-610 Owner’s Operating Manual...

  • Page 13: Controls And Functions

    Indicates the status of the lamp - Red when the lamp has exceeded its usage life or developed a problem. Please contact your Runco Dealer for assistance. - Flashing Red when the fans are not working or the lamp cover is open.

  • Page 14: Connector Panel

    7. RS-232C (RJ-11 Jack) RS-232C control signal input (refer to page 49 for details) The Runco logos on the front and rear of the projector can be rotated to match a floor or ceiling installation. To rotate the logo, grip it at the sides, pull it away from the projector and rotate it 180 degrees.

  • Page 15: Remote Control

    Exit and save the setting(s) of items in the menu. MENU Turns on/off the on-screen display menu. FOCUS Runco CL-610 Owner’s Operating Manual LIGHT Press to turn on the remote control back light. Press to turn on the projector. Press to turn off the projector.

  • Page 16: Remote Control

    Enable the PIP function. Use ARROW keys to adjust the position of the PIP window. See “PIP / PBP Function” on page 29. PIP+ Enlarge the size of PIP window. PIP- Shrink the size of PIP window. Runco CL-610 Owner’s Operating Manual...

  • Page 17: Installation

    • Ambient conditions may possibly impede the operation of the remote control. If this happens, point the remote control at the projector, and repeat the operation. • The Ø icon appears on the screen when a button for an unavailable function is pressed.

  • Page 18: Installation Considerations

    The audience sitting within the viewing cone area sees a brighter image than those sitting just outside this area. Runco generally does not recommend use of curved screens due to excessive brightness and uncorrectable geometrical distortion.
  • Page 19 Optical screens take light from the projector and redirect it to increase the light intensity at the front of the screen. This reduces it in other areas. A viewing cone similar to that of a curved, front-screen installation is created.
  • Page 20 • The CL-610 has a minimum throw distance factor of 1.37 and a maximum throw distance factor of 1.82. • The CL-610LT has a minimum throw distance factor of 1.86 and a maximum throw distance factor of 2.47. ������������������������� ������������������������������������������������������������...
  • Page 21 Lens Center Projection Distance If it is not possible to align the projector and screen as shown above, you can tilt the projector at a slight angle. In a ceiling installation, you do this by adjusting the ceiling mount. For a floor installation, turn the four adjustable feet on the bottom of the projector to adjust the projector height and/or projection angle.
  • Page 22 CEILING MOUNT—The projector can also be inverted and suspended from the ceiling using a specially designed ceiling mount fixture. This type of mounting is recommended for fixed installations and for those that want the projector out of sight or have a limited space for projector and audience.

  • Page 23: Connections

    When connecting your equipment, make sure to: 1. Turn off all equipment before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly connected. Runco CL-610 Owner’s Operating Manual DVD Player Connections Connecting Video Inputs ➤...
  • Page 24 Progressive component (DTV Y/P ) and DTV RGB. The projector will automatically detect the resolution. Progressive Component ➤ (DTV Y/P Red Blue Green DTV Source RGBHV (DTV RGB) ➤ Vert Horiz Red Blue Green DTV Source Runco CL-610 Owner’s Operating Manual...

  • Page 25: Connecting A Computer (Gbrhv)

    Use an HDMI (High-Definition Multimedia Interface) cable to connect the projector to an HDMI device. HDMI Source (DVD player or HD tuner with HDMI or DVI out) Runco CL-610 Owner’s Operating Manual Blue Green Connections Connecting a Computer (GBRHV) Connecting an HDMI™ Device...

  • Page 26: Connecting To Ac Power

    The CL-610 ships with various types of AC power cords. Choose the one that is appropriate to your locale. Plug the female end of the power cord into the AC receptacle on the rear of the projector (AC 100V ~ 240V). Then, connect the other end to your AC power source.

  • Page 27: Basic Operation

    • To adjust the projector height or projection angle, or to compensate for a mounting surface that isn’t level, turn the four adjustable feet on the bottom of the projector. Runco CL-610 Owner’s Operating Manual LIGHT S-VID COMP1 RGBHD HDMI...

  • Page 28: Selecting Video Memory

    16:9 image. • Press BRT (Brightness) to adjust picture brightness. • Press CONT (Contrast) to adjust picture contrast. Press COL (Color) to adjust color • intensity. • Press TNT (Tint) to adjust color tones. Runco CL-610 Owner’s Operating Manual...

  • Page 29: Setting The Menu

    • Press PIP+ or PIP- to adjust the size of the PIP window. • Adjust the position of the PIP window with the ARROW keys (▲,◄,▼,►). Runco CL-610 Owner’s Operating Manual INFO ENTER EXIT MENU For more information on settings, See “On- Screen Display Menus”...

  • Page 30: Turning Off The Power

    • The fans will run for three minutes to cool. • You can turn the projector back on after approximately two minutes. LIGHT S-VID COMP1 COMP2 RGBHD HDMI Runco CL-610 Owner’s Operating Manual...

  • Page 31: On-Screen Display Menus

    Video is the active source. To select a different source, use the ▲ or ▼ button to highlight it and press Enter or ►. Runco CL-610 Owner’s Operating Manual On-Screen Display Menus This unit is equipped with an on-screen display (OSD) menu for making adjustments and changing settings.

  • Page 32: Picture Quality Adjustments

    (1), the output signal (2), both (3) or neither (0). With a 480p or higher-resolution signal, the sharpness control is applied only • to the output signal and only when you set the Sharpness filter to “on” (1). Adjustment Runco CL-610 Owner’s Operating Manual...
  • Page 33 Once the desired adjustments have been entered, select Store Image Settings to save these settings into the “Memory 1” memory location. To recall stored custom image quality settings, select Restore Image Settings and choose “Memory 1,” “ISF Night” or “ISF Day.” Runco CL-610 Owner’s Operating Manual ➤ Color Temperature Color Temperature ➤...

  • Page 34: Aspect Ratio

    ‘blanked off’. This ratio is best suited for LaserDisc movies or non-anamorphic DVDs. Active Image Area • VIRTUALWIDE A 4:3 image is transformed into a 16x9 image. Runco CL-610 Owner’s Operating Manual...

  • Page 35: Installation

    NOTE: When you change a setting in the Installation menu, the change takes effect immediately; you do not need to press Enter afterwards. (Press Exit to return to the previous menu or Menu to exit.) Runco CL-610 Owner’s Operating Manual Installation On-Screen Display Menus...
  • Page 36 To correct distortion resulting from the angle of the projection, select Keystone Adjust and use the ◄ or ► arrows to make the image rectangular. NOTE: Runco recommends that the keystone feature not be used unless absolutely necessary, as it may cause artifacts in the image.

  • Page 37: Option

    When you set the OSD to 0, the menus remain on-screen until you hide them by pressing Menu. Press the ◄ or ► arrows to adjust the horizontal and vertical position of the OSD. Runco CL-610 Owner’s Operating Manual Option Reset Image Settings Load default of...
  • Page 38 RGB images such as those from a PC. Adjust as desired, keeping in mind that reducing noise (which reduces high frequencies) may also soften the image. PC & HD Adjust Auto Freq. Phase H.Pos. V.Pos. PIP/PBP Enable PIP Set Up PBP Set Up Runco CL-610 Owner’s Operating Manual Yes?

  • Page 39: Setup

    Gamma, Gain and Offset, select Store Color Temp.4 or Store Color Temp.5 to store your settings. To recall them, set the Color Temperature to +4 or +5 in the Image Adjustment menu (refer to “Picture Quality Adjustments,” earlier in this section). Runco CL-610 Owner’s Operating Manual Passcode Please Enter...
  • Page 40 Vertical: This option moves the image up or down within the area of available pixels. Gamma Selection RUNCO Enhance 1 RUNCO Enhance 2 ISF Day H Enhance V Enhance Chroma Enhance H Threshold V Threshold Chroma Threshold Image Over Scan Horizontal Vertical Runco CL-610 Owner’s Operating Manual +4 %...
  • Page 41 You have multiple CL-610 projectors and want to control them independently, as opposed to broadcasting commands from a single remote to all of them. In this scenario, you can use multiple remotes programmed to Runco CL-610 Owner’s Operating Manual ➤ Amplitude Adjust ➤...
  • Page 42 IR code. To simultaneously change the secondary IR code and synchronize that remote with a projector, point the remote at the projector, then press and hold ◄ and ► simultaneously for five seconds. The Remote Control edit window, shown at right, appears.

  • Page 43: Isf Calibration

    Runco video display devices. Accordingly, Runco recommends that setup and calibration be performed by an ISF certified installation technician.
  • Page 44 Press the ◄ or ► arrows to set the Splash Screen Timer. This timer controls how long the startup (ISF and Runco logo) image stays on-screen after you turn on the projector. Select from 5 to 60 seconds, in 1-second increments. When finished, press Exit.

  • Page 45: Lamp Replacement

    8. Turn on the power and go into the Setup/Reset Lamp Timer menu to reset the lamp timer. Refer to “Set Up” in the previous section, On-Screen Display Menus. Runco CL-610 Owner’s Operating Manual (Contact Your Runco Dealer)
  • Page 46 Lamp Replacement This page is intentionally left blank. Runco CL-610 Owner’s Operating Manual...

  • Page 47: Troubleshooting

    The lamp has exceed its red; POWER LED specified usage hours. is green The lamp has burned out. Runco CL-610 Owner’s Operating Manual Troubleshooting REMEDY Plug the power cord into the AC power socket on the rear of the projector and an electrical outlet.
  • Page 48 Troubleshooting This page is intentionally left blank. Runco CL-610 Owner’s Operating Manual...

  • Page 49: Rs-232 Setup

    RS-232 Pin Assignments D-Sub 9-pin female 1, 4, 6, 7, 8, 9 2. Connect the COM port to the RS-232 port on the projector. Use a standard, 4-wire RJ-11 telephone cable, wired straight-through. RJ-11 to D-Sub 9-pin (not included) Yellow...

  • Page 50: Rs-232C Control Codes

    RS-232C Control Codes NOTES: 1. All codes are in the ASCII format. 2. A carriage return is required after each command. 3. The projector will not accept RS-232 commands for 20 seconds after it is turned on or off. Code Function...
  • Page 51 Switch to DVI input (HDMI) x135x Switch to Component 1 input x136x Switch to Component 2 input x156x Background Color = Blue x157x Background Color = White x181x Toggle Blue Image on/off Runco CL-610 Owner’s Operating Manual RS-232C Control Codes (continued) RS-232 Setup...
  • Page 52 RS-232 Setup This page is intentionally left blank. Runco CL-610 Owner’s Operating Manual...

  • Page 53: Specifications

    210W NSH Lamp Life: 2000 hours Inputs: (1) Composite Video, (1) S-Video, (1) RGB/Component (via BNC), (1) RCA Component Video, (1) HDMI, (1) RS-232 12V Output: Max. 0.25 Amps, active when the projector is on Runco CL-610 Owner’s Operating Manual Specifications...
  • Page 54 - Contrast Ratio: 1400:1 to 2200:1 These are typical projector brightness and contrast specifications found in most companies’ sales literature. Runco includes these measurements in its literature to allow for direct comparison with other manufacturers’ projectors. These measurements are typically...

  • Page 55: Dimensions

    8.86 in. (225.0 mm) 0.91 in. (23 mm) 2.36 in. (60 mm) 8.07 in. (205 mm) 12.57 in. (319.15 mm) 16.31 in. (414.27 mm) 5.56 in. (141.22 mm) 2.66 in. (67.53 mm) 6.12 in. (155.45 mm) Runco CL-610 Owner’s Operating Manual...
  • Page 56 SERIA L N UM BE R RUMA-011115 rev 09-12-05 Runco International • 2900 Faber Street • Union City, CA 94587 • Ph (510) 324-7777 / (800) 23RUNCO / Fax (510) 324-9300 www.runco.com Runco CL-610 Owner’s Operating Manual...

Table of Contents