Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Runco Reflection CL-710
Summary of Contents for Runco Reflection CL-710
- Page 1 ’ WNER PERATING ANUAL CL-710 / CL-710LT...
-
Page 2: Limited Warranty
PARTS: Runco will provide new or rebuilt replacement parts for the parts that fail due to defects in materials or workmanship for a period of two (2) years from the effective date of delivery to the end user. - Page 3 For your convenience, keep the original bill of sale as evidence of the purchase date. IMPORTANT: WARRANTY REGISTRATION: Please fill out and mail your warranty registration card. It is imperative that Runco knows how to reach you promptly if we should discover a safety problem or product update for which you must be notified.
-
Page 4: Warning
User’s Manual Thank you for your purchase of this quality Runco video projector! It has been designed to provide you with the quality of video that is expected in a home theater. For the best performance, please read this manual carefully as it is your guide through the menus and operation. -
Page 5: Table Of Contents
Adjust the height ..........10 Installation For CL-710 (With 1.40 - 1.60 Lens) ....11 Throw Distance Chart For CL-710 (With 1.40 - 1.60 Lens) . -
Page 6: Overview
480P, 1080i and 720P (576P PAL Version) formats are all compatible with this unit (via an external DTV decoder, not provided). De-interlacing with 3:2 Pull-down Using Runco's proprietary De-interlacing technology, this projector provides exceptional scaling and film to video (3:2 pulldown) conversion for the most artifact-free images possible. PIP/ PBP function Picture in picture/ Picture by picture functions allow you to display two inputs on the screen at the same time. -
Page 7: Projector Outlook
Show the status of power and lamp. For more details, see "Control Panel" on page 5. 7. Top IR Sensor 8. Runco Logo (Can be turnedd off, see "Options" on page 24.) 6. Front Adjusters Adjust the height or projection angle 7. -
Page 8: Controls And Functions
LAMP LED Indicates the status of lamp Red when the lamp has developed a problem. Please contact your Runco Dealer for assistance. ZOOM RING Adjust the size of the image Rotate right to enlarge the image, and rotate left to make the image smaller. -
Page 9: Connector Panel
Connector Panel Video (RCA Jack) Composite video signal input. S-Video (mini DIN 4-pin) Y/C (S-video) signal input Component (RCA Jacks) 480i Component (Y/C ) video signal input RGB/ HDTV (BNC) or Progressive Scan DVD players DTV Y/P or DTV RGB video signal input. DVI/ HDCP Digital/ Analog signal input. -
Page 10: Remote Control
4:3 image is enlarged NON- linearly in horizontal direction to fit 16: 9 full screen display. Runco CL-710/ CL-710LT User’s Manual Hold down this button for ONE second to turn on the unit. Press this button to turn off the unit. - Page 11 PBP (Picture by Picture) Enable the PIP function. ACTIVE Switch to the active window in PIP display mode. PIP (Picture in Picture) Enable the PIP function. Use ARROW keys to adjust the position of the PIP window (see "PIP/ PBP function" on page 20) PIP+ Enlarge the size of PIP window.
-
Page 12: Installation
Turn on the main power switch in the rear of this unit (next to the AC inlet). The POWER LED will light up in orange. Press ON key on the remote control for ONE second to turn on the unit. Runco CL-710/ CL-710LT User’s Manual 2. Installation... -
Page 13: Adjust The Lens Zoom/Focus Ring
Adjust the Lens Zoom/Focus ring Adjust the projected image size you need with the zoom ring on the lens. To focus the image, rotate the focus ring on the lens. Adjust the height There are 4 screw adjusters on the bottom of this unit. -
Page 14: Installation For Cl-710 (With 1.40 - 1.60 Lens)
Installation For CL-710 (With 1.40 - 1.60 Lens) Ceiling Screen __________ (H) x __________ (W) B) THROW DISTANCE: CL-710 16 x 9 Screens: Minimum: (screen width x 1.40) = __________ inches Maximum: (screen width x 1.60) = __________ inches C) VERTICAL OFFSET: Screen width x 0.052 = _________ inches from the center of the lens. -
Page 15: Throw Distance Chart For Cl-710 (With 1.40 - 1.60 Lens)
Throw Distance Chart For CL-710 (With 1.40 - 1.60 Lens) Screen Height Screen Width 40.5 51.5 58.5 67.5 Screen Hight Screen Width 2. Installation CL-710 @ 1280 x 720 Min Throw Distance 100.80 107.80 112.00 117.12 121.80 124.60 128.80 130.20 134.40... -
Page 16: Installation For Cl-710Lt (With 1.85 - 2.40 Lens)
Runco CL-710/ CL-710LT User’s Manual Installation For CL-710LT (With 1.85 - 2.40 Lens) Ceiling Screen __________ (H) x __________ (W) B) THROW DISTANCE: CL-710LT 16 x 9 Screens: Minimum: (screen width x 1.85) = __________ inches Maximum: (screen width x 2.40) = __________ inches C) VERTICAL OFFSET: Two inches offset means that the center of the projection lens is 2"... -
Page 17: Throw Distance Chart For Cl-710Lt (With 1.85 - 2.40 Lens)
Throw Distance Chart For CL-710LT (With 1.85 - 2.40 Lens) Screen Height Screen Width 40.5 51.5 58.5 67.5 Screen Hight Screen Width Note: Two inches offset means that the center of the projection lens is 2” above the top of the screen (inverted ceiling) or 2”... -
Page 18: Connecting
Runco CL-710/ CL-710LT User’s Manual 3. Connecting When connecting, make sure to: 1. Turn off all equipment before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly connected. 4. Connect all audio signals to external speakers. This projector is not equipped with speakers. -
Page 19: Progressive Component (Dtv Y/Pb/Pr)
Progressive Component (DTV Y/P RGBHV (DTV RGB) The RGB BNC input supports two kinds of HDTV formats: Progressive component (DTV Y/P unit will auto detect the resolution automatically. 3. Connecting DTV Source DTV Source ) and DTV RGB. The... -
Page 20: Connecting A Computer (Dvi/ Hdcp)
Runco CL-710/ CL-710LT User’s Manual Connecting a Computer (DVI/ HDCP) PC or Notebook This unit is compatible with the following computer resoultions: 1280x720, 1024x768, 800x600, 640x480. 3. Connecting... -
Page 21: Basic Operation
4. Basic Operation Turning on the Power The Power LED lights orange when power is applied and the power switch is turned on. Press and hold the ON key on the remote control for ONE second to turn on the unit. The POWER LED will blink orange during warm up period, then light solid green. -
Page 22: Selecting "Aspect Ratio
For more detailed settings, see Chapter 5 Menu on page 22. Press Picture to access the picture setting menu. Press Info to access projector information. Runco CL-710/ CL-710LT User’s Manual 4. Basic Operation... -
Page 23: Selecting Input Source
Selecting Input Source When this unit is turned on, it will search for the input source you selected last time. You may select the input source directly on the remote control. PIP/ PBP function Press the PIP button to enable the PIP function For PIP purposes, there are two groups of inputs separated by their display modes: Video Group: Video, S-Video and Component Y/C... -
Page 24: Turning Off The Power
Runco CL-710/ CL-710LT User’s Manual Turning off the Power Press the OFF key on the remote control to turn off the unit. The POWER LED will blink green and the fans will speed up for a quick cool down. The projector will not respond to any command for 90 seconds. -
Page 25: Menu
Press the Enter or button to enter the setting of items in the menu, or press the Exit button to leave and save the setting of items in the menu. Main Menu Runco CL-710 > Video S-Video Component Component HD... -
Page 26: Picture Quality Adjustments
This is best suited for use with 16:9 DVD's. Adjustment Brightness Contrast Color Tint Sharpness Filter Temperature Store Recall Adjustment > Anamorphic (16:9) Standard (4:3) Letterbox Virtual Wide Active Image Area Runco CL-710/ CL-710LT User’s Manual arrow button and press Enter 5. Menu... -
Page 27: Options
'blanked off'. This ratio is best suited for LaserDisc movies or non-anamorphic DVD's. VIRTUAL WIDE: A 4:3 image is transformed into a 16x9 image to allow the user to watch SDTV on their widescreen. Options Runco CL-710 > Video S-Video Component... -
Page 28: Setup
Setup The Setup menu is passcode protected and for the use by Runco personnel only. Many of the adjustments available in this section are intended for use by trained service personnel only. If you are having difficulty with one of these items, please contact your Runco Dealer for service. - Page 29 White Balance: To adjust grey scale. White Balance Red Gamma Green Gamma Blue Gamma Red Gain Green Gain Blue Gain Red Offset Green Offset Blue Offset Store Reset Lamp Timer: Use this function to reset lamp usage counter. Reset only if you replace a new lamp. Background Color: To adjust background color to blue or white.
-
Page 30: Additional Information
(1,000) hours. The power will turn off automatically after 10 minutes. Replace the Lamp (Contact your Runco Dealer) 1. Loosen the screw of front lamp cover 3. Loosen the two screws of lamp module. -
Page 31: Troubleshooting
Check the connection. Select the correct input signal with the input keys: Video, S-Video, Component, Component HD, RGB HD and DVI-I on the remote control. Please contact your Runco dealer for assistance. Correctly connect the cables to the appropriate terminals. -
Page 32: Specifications
480p, 720p, 1080i Horizontal: 15-80 kHz Vertical: 50-100 Hz Recommended Width: 72-96 in. Maximum Width: 200 in. CL-710: 1.40 to 1.60/ CL-710LT: 1.85 to 2.40 Please refer to page 11 to page 14. 1000 ANSI Lumens* CSMS** Specifications: Home Theater Calibration: 489 ANSI Lumens 18.1 Foot-Lamberts (fL) - Page 33 Digital Cinema theaters using DLP(tm) technology. The foot-Lambert is dependant on screen size, screen gain, and projector light output. All measurements are made at RUNCO to ANSI/NAPM IT7.228-1997 specifications using the Photo Research PR-650 SpectraColorimeter and Minolta LS-100 Light Meter, Video Essentials test DVD, and a Stewart Filmscreen StudioTech 130, 1.3 gain, 72-inch wide screen.
-
Page 34: Dimensions
Runco CL-710/ CL-710LT User’s Manual Dimensions Unit: in. (mm) 6. Additional Information... -
Page 35: Rs-232 Setup
Image orientation - floor rear Image orientation - ceiling rear Back light on Back light off Runco CL-710/ CL-710LT User’s Manual PC Out Adapter 1. Connect D-Sub 9-pin female to RJ-11 adapter (not included) to Com port on PC. 2. Connect RJ-11 to Projector. - Page 36 RUMA-010100 rev 7-03 Runco International 2900 Faber Street Union City, CA 94587 ph (510) 324-7777 fax (510) 324-9300 www.runco.com...