Device Information (Home) Page; Change And Save Settings Using The Web; Basic Network Settings Page - Bosch B426 Installation And Operation Manual

Conettix Ethernet Communication Module
5.3.2

Device Information (home) page

The Device Information page shows basic information for the module in its main pane, and
provides links to the configuration web pages along the left-hand side.
Figure 5.2: Device Information page
5.3.3

Change and save settings using the web

The settings for the module are grouped by topic in the left column of the web interface in the
module menu structure.
Some settings (menu options) might be unavailable if:
–
–
–
Saving settings using the Web
To preserve edited values, click the OK button on each page before navigating to a different
setting page (menu).
To save all edited values and apply them to the module, click the Save and Execute link.
Notice!
Saving the settings might cause the module to terminate the current web browsing session.
5.3.4

Basic Network Settings page

The Basic Network Settings page provides the applicable options, depending on whether IPv6
mode is enabled or disabled.
Bosch Security Systems, Inc.
The setting conflicts with another configured setting (for example, the Static IP setting is
unavailable when DHCP is enabled).
The setting conflicts with the address setting (for example, the Panel Address setting is
read-only if the address switch is set to anything but 0).
The setting is unavailable in the current product release.
Installation and Operation Guide
Configuration | en 15
2016.08 | 08 | F.01U.266.226