Activating the B444-C
The B444-C communicator must be activated and have a valid cellular plan for proper usage.
The activation process assigns a phone number, IP address, and a data plan to the communicator. Activation occurs using one of
Using the cellular activation tools in RPS.
By submitting a support ticket in the Bosch Cellular Portal email at: email@example.com.
Calling Bosch Installer Services (800-289-0096). Please provide the IMEI and ICCID numbers found on the box or on the
communicator for activation.
**A valid Bosch Installer Services account is required for activation.
For the Conettix Plug-in cellular module text-based installation guide and other documentation, go to: www.boschsecurity.com
California State Fire Marshall
FCC, Part 15 Class B
Open Development Certiﬁ ed
This document is the intellectual property of Bosch Security Systems, Inc., and is protected by copyright. All rights reserved.
All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.
Bosch Security Systems, Inc. product manufacturing dates
Use the serial number located on the product label and refer to the Bosch Security Systems, Inc. website at
Conettix Plug-in cellular
module VZW LTE
en Installation Manual
Bosch Security Systems, Inc.
Bosch Sicherheitssysteme GmbH
130 Perinton Parkway
Fairport, NY 14450
© 2017 Bosch Security Systems, Inc.
F.01U.345.726 | 03 | 2017.10