Wd2145, Wd1160, Wd4060; Wd4190 - Smeg WD2145 User Manual

10.6.1 WD2145, WD1160, WD4060

WD2145, RS-232 port

10.6.2 WD4190

The following are located above the panel that carries the main switch and the printer (if installed):

RS232 port: for data transmission – connection by means of TRACELOG software.

"Data output" switch: used to activate the panel printer or data transmission on the RS232 port. These two
devices can never operate simultaneously. The data output switch activates the printer when turned to "II" or
the RS-232 port when turned to "I".
fig. 58 – WD4190: Position of the RS-232 port and the data output switch which activates the printer or the RS-232 port.
User Manual
fig. 57 – Position of the RS-232 serial port on the rear of the device
WD2145-WD1160-WD4060-WD4190
WD1160, WD4060, RS-232 port
Page 84 - 85