Door Opening - Smeg WD2145 User Manual

Instrument washers
Hide thumbs Also See for WD2145:
Table of Contents

Advertisement

4.2

DOOR OPENING

The following is a brief preview of the procedure for opening the door of the device for easier access to the chamber.
The points which follow provide a complete description of all the controls.
The appliance is equipped with an automatic door locking system.
Do not force it open; proceed as follows:
Connect the appliance to the electricity supply.
For WD4190 series only: open the hatch of the side cabinet and turn the main switch on.
Hold down the button with the On/Off symbol for 2 seconds to switch the appliance on.
Press the Door opening button: the appliance gives a beep when it receives the signal. Release the button
and the door will open automatically after a few moments.
To open the door without connecting the appliance to the electricity supply (useful for emergencies or in case of
power blackouts), the manual release system has to be used (see next point).
User Manual
BUTTONS TO BE PRESSED TO OPEN THE DOOR
On/Off
fig. 4 – Selecting automatic door opening
WD2145-WD1160-WD4060-WD4190
Door opening
Page 15 - 85

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd1160Wd4060Wd4190

Table of Contents