Manual Door Release Procedure; Side Cabinet Door Opening - Only If Present - Smeg WD3060 User Manual

The door may be opened during the cycle only if the temperature inside the washing chamber has not
exceeded 40°C. Use the keyboard to open the door.
Depending on the settings chosen for the system, a password must be entered to open the door.
It is always advisable to wait until the cycle terminates before opening the door.
To open the door without connecting the appliance to the electricity supply (useful for emergencies or in case of
power blackouts), the manual release system has to be used (see next point).
Per aprire la porta senza collegare elettricamente la macchina, utile in casi di emergenza o di mancanza tensione,
occorre utilizzare il sistema di sblocco manuale (si veda il paragrafo successivo).
7.1.1

MANUAL DOOR RELEASE PROCEDURE

If necessary, due to a malfunction or power blackout, the appliance can be opened manually by releasing the lock
using a screwdriver with stem Ø3mm; taking care not to damage the device.
1. This procedure is only possible with the appliance in "stand by" status, with no cycle running.
2. Warning: before opening the appliance manually, disconnect it from the electricity supply.
3.
Insert a screwdriver or a rod 3 mm in diameter into the hole in the bottom of the centre of the front panel.
4.
Push the pin upward until the lock is released
fig. 2 – Diagram showing how to release the lock by hand in any emergency.
It is dangerous to open the door when the temperature inside the washing chamber exceeds 50°C!
The manufacturer declines all liability for damage to persons or property caused by forcing the door open
during a thermal disinfection cycle.
7.2 SIDE CABINET DOOR OPENING -
The steel door of the side compartment is closed by a "magnetic lock": pull the handle of the door to open it. This will
give access to the switch that powers the machine and the compartment where the detergent tanks are positioned.
WD3060 - WD5090
only if present
USER MANUAL 13