Related Manuals for Smeg WM127IN
Summary of Contents for Smeg WM127IN
- Page 1 WM127IN Washing Machine User’s Manual Vaskemaskine Brugsanvisning Vaskemaskin Bruksanvisning Tvättmaskin Bruksanvisning Document Number 2820523539 / 18-02-14.(13:03)
-
Page 2: Important Instructions For Safety And Environment
1 Important instructions for safety and person (preferably an electrician) or someone designated by the importer in order to avoid possible risks. environment 1.2 Intended use This section contains safety instructions that will help protect • This product has been designed for domestic use. It is not from risk of personal injury or property damage. Failure to suitable for commercial use and it must not be used out follow these instructions shall void any warranty. of its intended use. -
Page 3: Appropriate Installation Location
2 Installation 2. Remove transportation safety bolts by turning them gently. Refer to the nearest Authorised Service Agent for installation 3. Attach the plastic covers supplied in the User Manual bag of the product. To make the product ready for use, review into the holes on the rear panel. (P) the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out. Preparation of the location and electrical, tap water and waste water installations at the place of installation is Keep the transportation safety bolts in a safe place to under customer's responsibility. -
Page 4: Connecting To The Drain
points. If any leaks occur, turn off the tap and remove the 1. Loosen the lock nuts on the feet by hand. nut. Retighten the nut carefully after checking the seal. To 2. Adjust the feet until the product stands level and prevent water leakages and damages caused by them, balanced. keep the taps closed when the machine is not in use. 3. Tighten all lock nuts again by hand. 2.5 Connecting to the drain • The end of the drain hose must be directly connected to the wastewater drain or to the washbasin. Your house will be flooded if the hose comes warning out of its housing during water discharge. Moreover, there is risk of scalding due to high washing temperatures! To prevent such situations and to ensure smooth water intake and discharge of the machine, fix the end of the discharge hose tightly so that it cannot come out. - Page 5 3 Preparation 3.4 Initial use Before starting to use the product, make sure that all 3.1 Sorting the laundry preparations are made in accordance with the instructions in • Sort laundry according to type of fabric, colour, and sections “Important safety instructions” and “Installation”. degree of soiling and allowable water temperature. To prepare the product for washing laundry, perform first • Always obey the instructions given on the garment tags. operation in Drum Cleaning programme. If your product 3.2 Preparing laundry for washing is not equipped with Drum Cleaning programme, perform the Initial Use procedure in accordance with the methods • Laundry items with metal attachments such as, underwired bras, belt buckles or metal buttons will described under “5.2 Cleaning the loading door and the damage the machine. Remove the metal pieces or wash drum” section of the user manual.
-
Page 6: Using Detergent And Softener
Adjusting detergent amount The loading door is locked while a programme is running. The amount of washing detergent to be used depends The door can only be opened a while after the programme on the amount of laundry, the degree of soiling and water comes to an end. hardness. In case of misplacing the laundry, noise and warning • Do not use amounts exceeding the dosage quantities vibration problems may occur in the machine. recommended on the detergent package to avoid 3.7 Using detergent and softener problems of excessive foam, poor rinsing, financial savings and finally, environmental protection. When using detergent, softener, starch, fabric dye, bleach • Use lesser detergent for small amounts or lightly soiled or limescale remover read the manufacturer's instructions... -
Page 7: Tips For Efficient Washing
Using starch • Use just a little amount (approx. 50 ml) of bleaching agent and rinse the clothes very well as it causes skin irritation. • Add liquid starch, powder starch or the fabric dye into the softener compartment. Do not pour the bleaching agent onto the clothes and do • Do not use softener and starch together in a washing not use it for coloured clothes. cycle. • When using oxygen based bleaches, select a programme • Wipe the inside of the machine with a damp and clean that washes at a lower temperature. cloth after using starch. • Oxygen based bleaches can be used together with Using bleaches detergents; however, if its thickness is not the same... -
Page 8: Operating The Product
4 Operating the product 4.1 Control panel 1 - Spin Speed Adjustment button 5 - On / Off button 2 - Display 6 - Delayed Start buttons (+ / -) 3 - Temperature Adjustment button 7 - Auxiliary Function buttons 4 - Programme Selection knob 8 - Start / Pause / Cancel button 8 / EN Washing Machine / User’s Manual... - Page 9 4.2 Display symbols 4.5 Main programmes Depending on the type of fabric, use the following main programmes. • Cotton Use this programme for your cotton laundry (such as bed sheets, duvet and pillowcase sets, towels, bathrobes, underwear, etc.). Your laundry will be washed with vigorous washing action for a longer washing cycle. • Synthetics Use this programme to wash your synthetic clothes (shirts, blouses, synthetic/cotton blends, etc.). It washes with a gentle action and has a shorter washing cycle compared to the Cottons programme. For curtains and tulle, use the Synthetic 40˚C programme with prewash and anti-creasing functions selected. As their meshed texture causes excessive foaming, wash the veils/ tulle by putting little amount of detergent into the main a - Spin Speed indicator wash compartment. Do not put detergent in the prewash b - Temperature indicator compartment.
-
Page 10: Temperature Selection
• Eco 40 4.8 Temperature selection Use this programme to wash your laundry for which you Whenever a new programme is selected, the maximum cannot use Cottons 60 °C programme. It gives the same temperature for the selected programme appears on the result with the Cottons 60 °C programme by washing for a temperature indicator. longer time at 40 °C, thus enabling energy saving. To decrease the temperature, press the Temperature • Mix 40 Adjustment button. Temperature decreases with increments Use this programme to wash your cotton and synthetic of 10° and finally, “-” symbol indicating the cold wash option clothes together without sorting them. appears on the display. • Intensive If you scroll to cold wash option and press Temperature You can use this programme for your durable clothes that Adjustment button again, the recommended you wish to be rinsed gently. In this programme an extra... -
Page 11: Programme And Consumption Table
4.10 Programme and consumption table Auxiliary functions Selectable Programme (°C) temperature range °C Cotton 2.10 1600 • • • • • • 90-Cold Cotton 1.40 1600 • • • • • • 90-Cold Cotton 0.70 1600 • • • • • • 90-Cold Intensive 1.40 1600... -
Page 12: Auxiliary Function Selection
4.11 Auxiliary function selection If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause / Cancel button. Select the desired auxiliary functions before starting The programme resumes. Water is drained, laundry is spun the programme. Furthermore, you may also select or and the programme is completed. cancel auxiliary functions that are suitable to the running • Pet hair removal programme by pressing the Start / Pause / Cancel button This function helps to remove pet hair that remain on your when the machine is operating. For this, the machine must garments more effectively. be in a step before the auxiliary function you are going to When you select this function, Prewash and Extra Rinse select or cancel. steps are added to the normal programme. Thus, washing Depending on the programme, press a, b, c or d buttons to is performed with more water (30%) and the pet hair is... - Page 13 flashes. Decrease the delayed start time by pressing the Changing the speed and temperature settings for Delayed Start - button. Programme duration appears after auxiliary functions 30 minutes. Press Start / Pause / Cancel button to start the Depending on the step the programme has reached, you programme. may cancel or activate the auxiliary functions; see, "Auxiliary function selection". 4.13 Starting the programme You may also change the speed and temperature settings; Press Start / Pause / Cancel button to start the programme. see, "Spin speed selection" and "Temperature selection". Start symbol showing the startup of the programme will turn Adding or taking out laundry on. Loading door is locked and Door Locked symbol appears Press the Start / Pause / Cancel button to switch the on the display. The symbol of the step from which the machine to pause mode.
-
Page 14: Maintenance And Cleaning
If you only want to drain the water without spinning: Lift the rear part of the siphon to remove it as illustrated. Just press Start / Pause / Cancel button. Pause symbol After performing the above mentioned cleaning disappears. Start symbol appears. Programme resumes and procedures, replace the siphon back to its seating and discharges the water only. push its front section downwards to make sure that the locking tab engages. 4.20 End of programme 5.2 Cleaning the loading door and the drum “End” appears on the display at the end of the programme. -
Page 15: Draining Remaining Water And Cleaning The Pump Filter
If the filter cap is one piece, pull the cap from both sides at the top to open. 1. Close the taps. 2. Remove the nuts of the water intake hoses to access the filters on the water intake valves. Clean them with an You can remove the filter cover by slightly pushing appropriate brush. If the filters are too dirty, take them out downwards with a thin plastic tipped tool, through the by means of pliers and clean them. gap above the filter cover. Do not use metal tipped tools to remove the cover. 3. Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly 3. Some of our products have emergency draining hose and under running water. - Page 16 Discharging the water when the product does not have an emergency draining hose: a. Place a large container in front of the filter to catch water from the filter. b. Loosen pump filter (anticlockwise) until water starts to flow. Fill the flowing water into the container you have placed in front of the filter. Always keep a piece of cloth handy to absorb any spilled water. c. When the water inside the machine is finished, take out the filter completely by turning it. 4. Clean any residues inside the filter as well as fibers, if any, around the pump impeller region. 5. Install the filter. 6. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one piece, seat the tabs in the lower part into their places first, and then press the upper part to close. 16 / EN Washing Machine / User’s Manual...
-
Page 17: Technical Specifications
6 Technical specifications Models (EN) WM127IN Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net weight (±4 kg.) Electrical input (V/Hz) 230 V / 50Hz Total current (A) 2200 Total power (W) 1200 Spin speed (rpm/ min., max.) 1.00 Stand-by mode power (W) 0.20 Off-mode power (W) 8810 Main model code • / - Single Water inlet / Double Water inlet • Available Technical specifications may be changed without prior notice to improve the quality of the product. Figures in this manual are schematic and may not match the product exactly. -
Page 18: Troubleshooting
7 Troubleshooting Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Cancelling the programme") Water in the machine. • Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the machine. -
Page 19: Product Fiche
PRODUCT FICHE Complying Commission Delegated Regulation (EU) No 1061/201 Supplier name or trademark SMEG Model name WM127IN Rated capacity (kg) Energy efficiency class Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) 1.200 Energy consumption of the standard 60°C cotton programme at partial load (kWh) 0.860 Energy consumption of the standard 40°C cotton programme at partial load (kWh) 0.740 Power consumption in ‘off-mode’ (W) 0.200 Power consumption in ‘left-on mode’ (W) 1.000 Annual Water Consumption (l) 9460 Spin-drying efficiency class Maximum spin speed (rpm) 1200 Remaining moisture Content (%) Standard cotton programme Cotton Eco 60°C and 40°C Programme time of the standard 60°C cotton programme at full load (min) Programme time of the standard 60°C cotton programme at partial load (min) Programme time of the standard 40°C cotton programme at partial load (min) Duration of the left-on mode (min) - Page 20 This file was downloaded from the site mans.io Instruction manuals and user guides Samsung Pioneer Alpine Dell Sharp Sony Philips Epson Netgear...