Routine Operation; Dashboard Overview; Point Details - MSA Chillgard 5000 Operating Manual

7

Routine Operation

WARNING!
Make sure to remove the cap from the exhaust port before operating the device. Failure to do so will
create back pressure that can result in inaccurate readings and damage to internal components.
Failure to follow these warnings can result in serious bodily injury or death.
7.1

Dashboard Overview

After the initial setup, the dashboard shows the main function buttons and tiles for the points that are
enabled.
A green box around the tile identifies the point currently being sampled.
Point tiles are titled by name, not number.
7.2

Point Details

When 2–4 points are enabled, large tiles show the point
name, number, current gas reading, and status.
When 5–8 points are enabled, medium tiles show the point
name, number, current gas reading, and status.
When 9–16 points are enabled, small tiles show the point
name, number, current gas reading, and status.
To see details about a specific point, on the dashboard,
select the point tile. A detail pop-up opens.
To close the detail pop-up and return to the dashboard,
select the X at the top right corner.
To hold and lock onto a point for an extended period manu-
ally, in the point detail pop-up, select "Hold".
Chillgard 5000
Routine Operation
42
US