***MEMORIZING WORKING CONDITION AND
USING THE MEMORIZED WORKING CONDITION***
MEMORY
HOT/COLD
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
1) Memorizing working condition
1. The laminator can memorize up to 6 settings.
2. Use up and down arrows to set
3. When you complete the optimum laminating conditions
(Speed & Temperature),
This setting is memorized and confirmed when the
light blinks.
4. To enter other settings into memory, repeat steps
2 and 3.
2) Using the memorized settings
1. You can choose any one of 6 settings in memory.
2. Use the up and down arrows to select
a setting form memory.
***COLD MODE***
1. Press
HOT/COLD
2. The speed will always be shown "2" and there is no memory
setting this function.
3. Speed can be varied 0 to 7 by selecting
4. You can release the machine from cold mode by
pressing
HOT/COLD
11
or
button.
MEMORY
button. It will show a
or
on the display.
or
button