Maintenance
The scan window should be kept clean.
Do not scratch the scan window.
Use soft brush to remove the stain from the scan window.
Use the soft cloth to clean the window, such as eyeglass cleaning cloth.
Do not spray any liquid on the scan window.
Do not use any detergent to clean other parts of the device except for water.
Note: The warranty DOES NOT cover damages caused by inappropriate care and maintenance.
Scanning Instructions
1. Present the barcode in front of the scan window of the scanner, adjusting the distance between them
within the range of 1cm-5cm.
2. For a successful read, the scanner will beep and send the data to the host.
11
Enter Setup
** Exit Setup