On/Off (Non-Dimming) Light Fixture(S), Occupancy Sensor Configuration - Current WA100-PM Installation Instructions Manual

Wireless Adapter (WA100-PM)
Fig. 6: On/Off (non-dimming) Light Fixture(s), Occupancy Sensor configuration:
This configuration allows the WA100-PM to provide automatic On/Off switching based on occupancy.
Set occupancy sensor for minimum time delay.
BLACK Hot 120-277VAC
Line Voltage
Wires
RED Switched Load
120-277VAC
Hot
ON/OFF
Light
Neutral
Fixture
Hot
ON/OFF
Light
Neutral
Fixture
WHITE Neutral
Neut
Wireless Adapter with Power Monitoring
Model: WA100-PM
Input: 120-277VAC, 50/60 Hz
Load: 15A@120-277VAC Ballast or Incandescent, 1hp@120-230VAC
Output: +24VDC; 75mA
Ambient Temperature -4° to 149°F (-20° to 65°C)
FOR INDOOR USE ONLY UL 2043 Plenum Rated
Patent: www.daintree.net/company/patents
00228103007-00000
IEEE Address:
Driver type:
On/Off (no dimming)
Blue (Digital In 1)
15A
Load
Red Yellow (Digital In 2)
Relay
Orange (0-10V In)
45mA
Red (24VDC Output)
White
Black (Ground)
Green (Digital Out LSD)
15A+45mA
Hot
Violet (0-10V Out)
Black
WA100-PM Gray (Ground)
CONTAINS FCC ID: Z6G-DT357
RoHS CONTAINS IC: 10478A-DT357
C US
CAN ICES-3 (B)/NMB-3(B)
24V in
24VDC
Occupancy Common
Sensor
Control Out
DIP Switches
Wired
↓ OFF
Sensor:
DIP Switch Positions:
O
N
1 2 3 4 5 6
Occupancy
( # 4 , 5 O N )
Low Voltage
Wires
Cap unused
wires.
RED 24VDC Power Output
BLACK Digital Ground
BLUE Digital Input 1
8
ON