Bi-Level Switching - Current WA100-PM Installation Instructions Manual

Wireless Adapter (WA100-PM)
Fig. 11: Bi-level Switching:
This configuration allows the WA100-PM to switch loads independently in a bi-level driver (or 2 drivers), providing no
load (0%), partial load (according to the driver/ballast capability) or full load (100%).
WHITE Neutral
BLACK Hot 120-277VAC
Line Voltage
Wires
RED Switched Load 120-277VAC
Bi-Level
Neutral
Driver/Ballast
(or 2 driver/ballasts)
15A
Load
Red
Relay
Wireless Adapter with Power Monitoring
45mA
Model: WA100-PM
Input: 120-277VAC, 50/60 Hz
Load: 15A@120-277VAC Ballast or Incandescent, 1hp@120-230VAC
Output: +24VDC; 75mA 15A+45mA
Ambient Temperature -4° to 149°F (-20° to 65°C)
FOR INDOOR USE ONLY UL 2043 Plenum Rated
Patent: www.daintree.net/company/patents WA
00228103007-00000
IEEE Address:
RoHS
C US
Hot
Switched Hot
DIP Switches
Driver:
↓
O
Bi-Level
N
1 2 3 4 5 6
( # 3 , 4 O N )
Bi-Level Switching States
Intensity Level
Off (0%)
Medium (1-99%)
Maximum (100%)
Blue (Digital In 1)
Yellow (Digital In 2)
Orange (0-10V In)
Red (24VDC Output)
Black (Ground)
Green (Digital Out LSD)
Violet (0-10V Out)
Gray (Ground)
CONTAINS FCC ID: Z6G-DT357
CONTAINS IC: 10478A-DT357
CAN ICES-3 (B)/NMB-3(B)
+24VDC
Aux.
Relay
OFF
Wired Sensor:
DIP Switch Positions:
None
WA100 Switched Aux Relay
Off Off
On Off
On On
Low Voltage
Cap unused
RED 24VDC Power
GREEN Digital Ouptut LSD
GND
13
ON
Wires
wires.