Hardware Lockswitch - OHAUS CKW-55 Instruction Manual

EN-38 CKW-55 CHECKWEIGHER
Lockout Menu Settings
This menu item is used to define which menus are locked or unlocked.
Selections are: Reset, Cal, Setup, Read, Mode, Print, Com, I/O, GMP Data. Reset unlocks all
menus. Sub-menus selections are: OFF or On.
Note: Attempting to alter a locked menu will temporarily show LOC for invalid/locked entries.
Only the calibration-Test function is always available.
Lockout Key Functions
This menu item is used to define which keys are locked or unlocked.
Selections are: Reset, Numeric, Clear, Target, Library, Lib Save, Next, Zero, Print, Units, GNT,
Tare, Menu.
Selections are: OFF, On.
Note: : : : : If the menu key has been locked, it can be manually unlocked with an extended press of
the G/N/T Menu button (10 seconds). when this is done, the display shows UN-LOC
momentarily then, the Menu mode can now be entered normally.
3.6.9 Hardware Lock Switch
The Hardware Lock switch may be used to add extra security to the Lockout menu settings.
When the switch is set to the LFT (LOCK) position, none of the Lockout menu settings can be
changed. Refer to Appendix B.2, Figure B-1 for illustration and precaution when exposing
internal components of the indicator.