Mode Menu - OHAUS CKW-55 Instruction Manual

EN-28
Power Saver
This menu item is used to enable power saving function. Selections are:
SLEEP
Specifies the number of minutes that the display will remain on in the absence of scale
activity. The display flashes the last Sleep value entered. Values between 0 to 99 are
entered via the numeric keypad. A value of 0 is equal to Sleep mode OFF.
Note: With LFT turned On, the scale must be at center of zero for sleep mode to initiate.
AUTO-OFF
Specifies the number of minutes that the Indicator will remain on in the absence of
scale activity. The display flashes the last value entered. Values between 0 to 99 are
entered via the numeric keypad. A value of 0 is equal to Auto-Off Timer OFF.
END
Represents the end of the menu.

3.6.3 Mode Menu

The Mode menu is used to configure parameters of the available application modes.
Reset
This menu item is used to reset the Mode menu to factory defaults. Selections are: No, Yes.
Checkweigh Mode
This menu item is used to enable or disable the Checkweigh mode. Selections are: OFF, On.
Library Mode
This menu item is used to enable or disable the Library mode.
Selections are: OFF, On.
Set Point Input
This menu item is used to define checkweigh set point formats. (refer to Section 3.5.2).
Selections are:
Range (RNG) = Acceptance range between a Minimum (under) and Maximum (over)
value.
Variance (VAR) = Input a Target value and the Minimum and Maximum weight variance
from the Target.
Percent (PCT) = Input a Target value and the Minimum and Maximum % variance from
the Target.
Note: Changing the set-point input settings clears existing set-point entries.
CKW-55 CHECKWEIGHER