Checkweighing; Bar Graph, Beeper And Weight Display Indication; Summary Of Checkweigh Key Functions - OHAUS CKW-55 Instruction Manual

EN-16

3.5.2 Checkweighing

The CKW Series features multiple user-configurable checkweighing functions that permit weighing items against preset
minimum-maximum and target parameters.
Notes: 1. Checkweighing and target entry operations are enabled only when Checkweigh is turned on in the Mode Menu
(refer to Section 3.6.3, Mode Menu). When enabled from the menu, Checkweigh mode is automatically active
upon exiting from the Mode Menu.
2.The weight of the item being checked is net of any Tare or Pre-set Tare value.

Bar Graph, Beeper and Weight Display Indication

The CKW-55 Indicator features a 24-segment, 3-color Bar Graph, complemented by an audible Beeper and Weight Display
visual alert (refer to Sections 3.6.1 Setup Menu and 3.6.3 Mode Menu). These checkweigh indication features are easily
configurable and can be turned on or off to suit most user preferences.
Bar Graph segments illuminate according to the following conditions:
Under (yellow)
Accept (green)
Over (red)
NOTE: The checkweigh TARGET button and menu settings can be locked to resist tampering of checkweigh parameters (refer
to Sections 3.6.3 Mode Menu and 3.6.8 Lock Menu).

Summary of Checkweigh Key Functions

Use the following buttons to establish checkweigh set point values (Checkweigh Mode is on).
TARGET Checkweigh Start, Accept and Advance button.
1. Initiates the Target setting sequence and
2. Accepts the displayed values and advances to the next sequence.
C In numeric entry sequence, short press clears one digit at a time, long press erases the display
(shows - - - - - - ). Re-enter a new value.
NEXT +/- Toggles the displayed value being entered between negative and positive.
= weight is below preset minimum value.
= weight is equal or within preset target range.
= weight exceeds preset maximum value.
CKW-55 CHECKWEIGHER