Menu; Menu Structure - OHAUS CKW-55 Instruction Manual

CKW-55 CHECKWEIGHER
3.3

Menu

3.3.1 Menu Structure

CALIBRATION (Sec. 4.1)
Span Perform
Linearity Perform
Calibration Test Perform
Geo Factor: 0...16...19...31
End
MODE (Sec. 3.6.3)
Reset: No, Yes
Checkweigh: Off, On
Library: Off, On
Set Point Input: Range, Variance, %
Beeper Signal: Off, Accept, Under,
Over, Under-Over
Display Signal: Off, Accept, Under,
Over, Under-Over
Graph Increment: Scaled, Auto, User
Graph Display: Segment, Bar, Block
End
I/O (Sec. 3.6.6)
Reset: No, Yes
External Input: Off, Tare, Zero, Print,
Units, GNT, Accumula-
tion, Start-Stop,Tare-
Start-Stop
Input Beep: Off, On
Relay Output*: Type, Sequence, Contact
End
NOTES:
1. Bolded items indicate factory default settings.
2. The unit selected for "Calibration Unit" will become the default "On" unit in the event that all other units are set to "Off".
3. When the Legal for Trade setting is changed to "On", the following items are affected:
i. Span and Linearity calibration are unavailable, Geo factor is viewable but not alterable, Cal Test will operate.
ii. Underlined menu items become forced as default.
4. *Some menu items will only become available when certain optional accessories are installed.
5. Using the Reset function in the "SETUP" menu will not change the values entered for FS Capacity or Graduation.
SETUP (Sec. 3.6.1)
Reset: No, Yes
Legal-For-Trade: Off, On
kg kg kg kg kg, lb
Calibration Unit:
FS Capacity: Numeric Entry
Graduation: Numeric Entry
Zero Range: 2%,18%, 100%
Retain Zero Data: Off, On
Auto-Tare: Off, On, On Acc
Beep Volume: Off, Lo, Hi
Key Beep: Off, On
End
PRINT (Sec. 3.6.4)
Reset: No, Yes
Stable Only: Off, On
Auto Print Mode: Off, Stable, Interval,
Continuous
Print Content: Display, Numeric,
Header, Setpoint,
Gross, Net, Tare, GMP,
Accumulation
Layout: Format, Feed
List: Menu, Library
End
GMP (Sec. 3.6.7)
Reset: No, Yes
User ID: Enter 6 characters
Project ID: Enter 6 characters
Scale ID: Enter 6 characters
Date: Format, Set
Time: Format, Set
End
READOUT (Sec. 3.6.2)
Reset: No, Yes
Unit: kg, lb, g, oz, lb:oz, %
Stable Range: .5d, 1d, 2d, 5d
Averaging Level: Lo, Med, Hi
Auto-0 Tracking: Off, .5d, 1d, 3d
LED Brightness: Off, Lo, Med, Hi
Bar Brightness: Off, Lo, Med, Hi
Power Saver: Sleep, Auto-off
End
COM (Sec. 3.6.5)
Reset: No, Yes No No No No
Baud Rate: 300, 600, 1200, 2400,
4800, 9600 9600 9600,19200 9600
9600
Parity: None, Even, Odd None None None None
Data Length: 7 7 7 7 7 , 8
Stop Bit: 1, 2 2 2 2 2
XON/XOFF XON/XOFF
Handshake: None, XON/XOFF XON/XOFF XON/XOFF
Address*: Off, On
(00, 01...99)
Alt Command: Print, Tare, Zero
End
LOCK (Sec. 3.6.8)
Menu: Reset, Cal, Setup, Read,
Mode, Print, Com, I/O,
GMP Data
Key Function: Reset, Num, Clr, Target,
Lib, Lib Save, Next, Zero,
Print, Units, GNT, Tare,
Menu
End
EN-11