Lockout Menu - OHAUS CKW-55 Instruction Manual

CKW-55 CHECKWEIGHER
Date Setup
This menu item is used to define the date parameters. Selections are: Format, Set.
FORMAT
Selections are:
MDY = MM/DD/YY ( "/" separators on printout).
D.M.Y = DD.MM.YY ( "."Separators on printout).
YMD = YY/MM/DD ( "/" separators on printout).
SET
This menu item is used to enter the current date via the numeric keypad, (example 032404 for
March 24, 2004).
Note: The date is retained in memory even when power is off.
Time Setup
This menu item is used to define the time parameters. Selections are: Format, Set.
FORMAT
Selections are:
12hr = Set time format to 12:00 AM/PM
24hr = Set time format to 24:00
The display flashes the current time. If Time Format selected is 12hr, PM is displayed (if 24hr,
skip and proceed to next menu).
SET
This menu item is used to enter the current time via the numeric keypad (example 0105 for
1:05).
Note: The time is retained in memory even when power is off.
END
Represents the end of the menu.

3.6.8 Lockout Menu

This menu is used to lock access to menus and key functions. When a menu is locked, the
data can be viewed but not changed. When a key function is locked, the associated key-press
is ignored. To further resist tampering, the Hardware Lock Switch on the PC board (refer to
Appendix B.2) can be set to prevent changes to the Lockout Menu.
Note: If a key has been locked out, the External Input selection assigned to perform this same
function is also locked out.
EN-37