Splash Screen Loading; Database Loading - Garmin G1000 NXi Supplemental Maintenance Manual

Hide thumbs Also See for G1000 NXi:
Table of Contents

Advertisement

3.11 Splash Screen Loading

When all software and configuration has been loaded, the splash screens must be loaded to the
display units (PFD and MFD).
Insert the software loader card in the upper slot of the MFD.
Cloe MFD circuit breaker.
When prompted to update system files, press the NO softkey.
When prompted to update splash screen files, press the YES softkey.
When the SYSTEM STATUS configuration page appears, Open the MFD circuit breaker.
Remove the loader card from the MFD and insert it into the upper slot of the PFD.
Close PFD (ESS BUS) circuit breaker.
When prompted to update system files, press the NO softkey.
When prompted to update splash screen files, press the YES softkey.
When the SYSTEM STAUTS configuration page appears, Open PFD (ESS BUS) circuit
breaker.

3.12 Database Loading

Follow this procedure to load the databases.
Obtain the following databases from fly.garmin.com and install on a blank 16GB or larger
card or by obtaining Garmin SD Card p/n 010-00474-50. Databases with an asterisk are
not included on the p/n 010-00474-50 SD card. When obtaining the databases from
fly.garmin.com and using SD cards smaller than 16GB, you may need to use multiple
cards (or reuse one) to load all the databases into the G1000 system.
a. Terrain (Worldwide, 4.9 Arc Second, TBD2 format)
b. Obstacle (US/Canada/Europe, OBD2 format)
c. AOPA Airport Directory (US)
d. AC-U-KWIK Airport Directory*
e. SafeTaxi (US, North America*, Canada*, Europe*, Full Coverage*)
f.
Basemap (Worldwide)
g. Garmin FliteCharts (US, Canada*, Europe*)
h. Jeppesen ChartView*
i.
IFR/VFR Charts (US)
j.
Navigation*
With the displays off, insert the SD card into the MFD top slot.
Apply power to the PFD and the MFD.
On the MFD, database verification messages may appear. If so, follow the on-screen
instructions to continue.
Go to the MFD Aux - Databases page to monitor the automatic database update
progress. The new databases will show "Syncing" to the Standby column. After the
G1000 Supplemental Maintenance Manual
Textron Nav III Series
190-02128-04
Page 3-36
Revision 3

Advertisement

Table of Contents
loading

Table of Contents