Updating Software And Map Data; Using Ximage To Customize Your Splash Screen - Garmin StreetPilot 2820 Owner's Manual

Updating Software and Map Data

1. Load the USB drivers using the enclosed DVD-ROM. See
page 22.
2. Connect the AC cable to the power connector on the back
of the StreetPilot 2820. Turn on the StreetPilot 2820
3. Connect the USB cable to your StreetPilot 2820 and your
computer.
4. Go to www.garmin.com/products/sp2820. Select
and Downloads.
5. Click Download next to the unit software.
6. Read and agree to the terms. Click Download.
7. Select Run (or Open). Your software is updated.
You can also use WebUpdater to update your StreetPilot 2820
software. Go to www.garmin.com/products/webupdater/
about WebUpdater.
Check www.garmin.com/unlock/update.jsp
your map software is available.
To find out the version of the maps that are loaded on your 2820,
open the Menu page. Touch
load maps to your 2820, see the MapSource Help file.
StreetPilot 2820 Owner's Manual
Updates
to see if an update for
Settings > About > Detail Maps. To
Using xImage to Customize Your Splash
Screen
xImage allows you to exchange images between your computer
and your StreetPilot. Use xImage to download your current splash
screen, then customize or replace it, and send it back to your
StreetPilot. You can download xImage from the Garmin Web site
at www.garmin.com/ximage/. Refer to the Help file for complete
instructions about using xImage.
to learn
L F Y 2820
OADING ILES ON OUR
25