Garmin G1000 NXi Supplemental Maintenance Manual page 27

Loader Card Creation
The software image is an executable self-extracting file which builds the correct file structure
onto an SD card for use loading software to the G1000 System. To obtain the current file follow
the procedures outlined below.
In order to create a Textron Nav III system loader card, the installer
completing these procedures must be an authorized Garmin Service
Center to gain access to the necessary data via the Garmin website.
1. Go to www.garmin.com
of the home page. Enter your Garmin Dealer username and password.
2. Select Support button then select Software Downloads.
G1000 Supplemental Maintenance Manual
Textron Nav III Series
190-02128-04
NOTE
and click on the Dealer Resource Center link in the lower portion
Page 3-7
Revision 3