Garmin G1000 NXi Supplemental Maintenance Manual page 40

Hide thumbs Also See for G1000 NXi:
Table of Contents

Advertisement

GSU 75 Software/Configuration Loading (if installed)
Follow this procedure to configure the GSU 75 ADAHRS. Do not follow the procedures in this
section if a GSU 75 is not installed in the aircraft.
Move the cursor to the Item window and rotate FMS inner knob to display drop down
menu. Highlight "Baseline Option – GSU75 Installation" and press the ENT key to
select it.
Press the CHK All softkey.
In the PRODUCT window, move the cyan selection box down with the large FMS knob
to highlight the "CARD COPY" configuration check box. Press the ENT key to uncheck
the configuration check box.
Press the Load softkey.
Monitor the loading progress and verify the software load completes without errors as
indicated by the following:
Green "PASS" or White "N/A" in all Configuration and Software columns.
"Upload Complete.............COMPLETE" in the summary box.
Press the ENT key to acknowledge the prompt that appears in the pop-up box.
GTX 335 Transponder Software/Configuration Loading (if installed)
Follow this procedure to configure the GTX 335 transponder in the aircraft. Do not follow the
procedures in this section if a GTX 335 is not installed in the aircraft.
Move the cursor to the Item window and rotate FMS inner knob to display drop down
menu. Highlight "Baseline Option – GTX 335 Installation" and press the ENT key to
select it.
Press the CHK All softkey.
In the PRODUCT window, move the cyan selection box down with the large FMS knob
to highlight the "CARD COPY" configuration check box. Press the ENT key to uncheck
the configuration check box.
Press the Load softkey.
Monitor the loading progress and verify the software load completes without errors as
indicated by the following:
Green "PASS" in the Configuration and Software columns for each item loaded.
"Upload Complete.............COMPLETE" in the summary box.
Press the ENT key to acknowledge the prompt that appears in the pop-up box.
G1000 Supplemental Maintenance Manual
Textron Nav III Series
190-02128-04
Page 3-20
Revision 3

Advertisement

Table of Contents
loading

Table of Contents