Figure 6-2, Gsu 75 Configuration Module Installation; Table 6-2, Gsu 75 Configuration Module Kit - 011-00979-20 - Garmin G1000 NXi Supplemental Maintenance Manual

GSU 75 Configuration Module Removal & Replacement

Figure 6-2, GSU 75 Configuration Module Installation

Table 6-2, GSU 75 Configuration Module Kit – 011-00979-20
Item
1 Sub-Assy,Potted,Config Mdl,w/EEPROM,Jackscrew
2 Cable, 4-Conductor Harness
3 Pins, #22 AWG (HD)
4 Pan Head Screw
Removal:
1. Disconnect connector from LRU.
2. Remove 2 screws from cover and remove cover.
3. Unplug the connector from the configuration module.
4. Remove 1 screw from configuration module.
5. Remove the configuration module.
Installation:
1. Inspect connector for damaged pins.
2. Insert the connector into the configuration module.
3. Place configuration module in position.
4. Install 1 screw attaching the configuration module to the backshell.
5. Assembly of the connector is the reverse of the disassembly.
6. Checkout per Section 6.5.3.
G1000 Supplemental Maintenance Manual
Textron Nav III Series
190-02128-04
Description
CONFIGURATION MODULE
Qty Needed
1
1
4
1
Garmin Part
Number
011-02179-00
325-00122-00
336-00021-00
211-60232-07
Page 6-5
Revision 3