Dräger Infinity M300 series Supplemental Manual page 44

Reprocessing of device-specific components
Class of active ingredient
Quaternary ammonium com-
pounds
Aldehydes
1) Virucidal against enveloped viruses
Dräger recommends using a surface disinfectant from the list above. Other disinfectants are used at one's
own risk.
Dräger points out that oxygen-releasing agents and chlorine-releasing agents may cause color change in
some materials. Color change does not indicate that the product is not functioning correctly.
At the time of validation, the listed surface disinfectants showed good material compatibility. The manu-
facturers of the surface disinfectants have verified at least the following spectra of activity:
– Bactericidal
– Yeasticidal
– Virucidal or virucidal against enveloped viruses
Observe the specifications of the surface disinfectant manufacturers. Use surface disinfectants that are
nationally authorized.
Surface disinfection with cleaning
WARNING
Risk due to penetrating liquid
Penetrating liquid may cause the following:
– Damage to the device
– Electric shock
– Device malfunctions
Ensure that no liquid penetrates the device.
1 Remove soiling immediately. Use a cloth dampened with disinfectant to remove soiling.
2 Perform surface disinfection.
3 After the product has been exposed to the disinfectant for the specified contact time, remove residual
disinfectant.
4 Wipe with a cloth dampened with water (preferably drinking-water quality). Allow the product to dry.
5 Check the product for visible soiling. Repeat steps 1 to 5 if necessary.
6 Check the product for visible damage and replace if necessary.
44
Surface disinfectant
Mikrozid sensitive liquid
Mikrozid sensitive wipes
Mikrozid alcohol free liquid
Mikrozid alcohol free wipes
1)
acryl-des
Buraton 10 F
Supplement – Infinity M300 and M300+ Series – VG2.4
Manufacturer
1)
Schülke & Mayr
1)
1)
1)
Schülke & Mayr