Machine Transportation - Snorkel TM12 Service Manual

TIE DOWN/LIFT POINTS
(D-RINGS)
FIGURE 2-10: Safe transportation procedure
Centre of gravity
FIGURE 2-11: Centre of gravity when empty
The machine can be transported using any of the procedures stated below.
CRANE
Before lifting with a crane, ensure the straps to chassis lifting/tie down points are securely fas-
tened. A view of the chassis lifting points is shown in figure 2-10.
FORKLIFT
A view of the forklift lifting procedure is shown in figure 2-10.
TM12
FORKLIFT FROM SIDE
Wheel load Decal
D A N G E R
!
Forklift is for transport only. Refer to speci cations for weight of the machine on page 24 and be certain
that the forklift is of adequate capacity to lift the machine.

MACHINE TRANSPORTATION

Centre of gravity
!
TIE DOWN/LIFT POINTS
(D-RINGS)
Page 2 - 15