10
PERIPHERAL DEVICE
10-4) Surge absorber (surge suppressor, surge killer)
Shown below are recommended surge suppressors (for 250 [V] or less) to be installed on peripheral
devices (magnetic contactor, solenoid value, electromagnetic brake, etc.) of the servo amplifier.
DC equipment should be equipped with a diode for surge voltage suppression.
For control relay, etc.
Type: S1-B-0 (made by Okaya Sangyo)
27.5
For electromagnetic contactor
Type: S2-A-0 (made by Okaya Sangyo)
37.5
* A non-inductive capacitor and non-inductive resistance are connected in series and sealed in epoxy
resin.
S1-B-0:200 Ω (1/2 W) + 0.1 µF
S2-A-0:500 Ω (1/2 W) + 0.2 µF
Preparatory
soldering
300
300
S1-B-0
Ω Ω Ω Ω
0.1 uF - 200
AC250 V B
Ω
200
+ 0.1u
Series connection
Mounting leg
(inflammable structure)
40±1
20±1
40±1
30±1
The purpose of the surge killer is
suppression of surge voltage.
10-8