9-3) Fault Display - FujiFilm RYB500S3-VBC User Manual

9
INSPECTION AND MAINTENANCE

9-3) Fault display

The fault diagnosis is explained in three sections below.
(1) Initial status
(2) When error (failure) is not displayed
(3) Faults with alarm indication and remedy
(1) Initial status
After turning on commercial power for the servo amplifier, either of 7-segment LEDs on the keypad
panel lights up. The [CHARGE] LED lights on the keypad panel.
[CHARGE] LED
If turning on power displays nothing, contact us.
7-segment LEDs (2 digits)
Keypad panel
9-4