1-3) Servomotor - FujiFilm RYB500S3-VBC User Manual

1-3) Servomotor

n Appearance of product
Frame
The frame supports the
output shaft of the
servomotor. The frame is
molded of resin.
Output shaft
The output shaft of the
servomotor rotates.
Power cable
Connect to the servo amplifier using
the optional cable or connector kit.
The wiring from the power cable up to
the servo amplifier is called "power
wiring."
Flange
The servomotor is installed to the
machine on this side.
n How the nameplate looks
Type designation
Serial No.
MODEL : GYC751DC1-CA
SER No. :************************
* The figure shows type GYC751DC1-C. The appearance
varies according to the motor capacity.
Made in Japan
1-7
Outline
Encoder
A 16-bit serial encoder is
housed on the side of the
servomotor opposite to the
load.
Encoder cable
Connect to CN2 of the servo
amplifier using the optional
cable or connector kit.
The wiring from the encoder
cable up to the servo
amplifier is called "encoder
wiring."
1