Blind Hemming - ELNA lotus 2 Instruction Manual

q w e
4
z
1/4˝
(0.4 – 0.7 cm)
e
q
x
c
v

Blind Hemming

q Stitch pattern:
w Thread tension dial: 2 to 6
e Presser foot:
z Use the same color thread as the fabric.
1/4˝
(0.4 – 0.7 cm)
q Heavy weight fabric
e
w Light weight fabric
e Wrong side of the fabric
w
x There is a sliding guide screw on the blind hem foot
r
y
t
r Screw
t Guide
y Folded edge
c Lower the presser foot. Sew, guiding the folded edge
r
t
y
v Open the fabric after sewing is finished.
50
11
Blind hem foot G
On heavy weight fabrics that ravel, the raw edge
should be overcast first.
Fold the hem, as illustrated.
that allows you to control where the needle pierces
the edge of the fabric fold.
Adjust the screw so that at the leftmost position of the
stitch, the needle just pierces the edge of the fold.
NOTE:
If the needle pierces too far left, the stitch will show
through on the right side of the fabric.
along the guide in the foot.