r Needle up/down button
Press the needle up/down button to bring the needle up
t Thread cutter button
Press the thread cutter button to trim the threads after
The thread cutter mark will blink y while the machine
cuts the threads.
The thread cutter button does not function:
- directly after turning on the power.
- after being pressed 3 times in a row.
Use the thread cutter on the face cover if the thread is
#30 or thicker (refer to page 27).
u Stitch width adjusting button
" or "
" to change the stitch width or needle
drop position o, depending on the selected stitch
pattern. Refer to pages 30, 33 and 39.
i Stitch length adjusting button
" or "
" to change the stitch length !0 of the
selected pattern. You can also adjust the buttonhole
density, the evenness of darning, and the size of eyelet
with this button. Refer to pages 30, 33 and 39.