Inserting The Bobbin - ELNA lotus 2 Instruction Manual

z
q
w
x
e
c
v
r
b
y
Inserting the bobbin
CAUTION:
Turn OFF the power switch or press the lockout key to
lockout the machine before inserting the bobbin and
threading the bobbin holder.
z Place a bobbin in the bobbin holder w with the thread
running off counterclockwise.
q End of thread
w Bobbin holder
x Guide the thread into the first notch e on the front
side of the bobbin holder.
e Notch
c Draw the thread to the left, sliding it between the
tension spring blades.
v Continue to draw the thread lightly until the thread
slips into the second notch r. Pull out about 4˝ (10
cm) of thread.
r Notch
b Attach the hook cover plate. Check the threading by
referring to the diagram t shown on the hook cover
plate.
t Threading diagram
y End of thread
t
20