Download  Print this page

Basic Sewing Straight Stitch Sewing; Starting To Sew; Securing Seams; Cutting Threads - ELNA lotus 2 Instruction Manual

Hide thumbs

Advertisement

q
w
e
4
q
w
e
r
BASIC SEWING
Straight Stitch Sewing
q Stitch pattern:
w Needle thread tension:
e Presser foot:
NOTE:
When sewing with the satin stitch foot F or buttonhole
foot R, pull the thread to the left to hold the thread.
Starting to sew
Raise presser foot and position the fabric next to a seam
guide line on the needle plate. Lower the needle to the
point where you want to start.
Pull the thread toward the rear and lower the presser
foot.
Press the start/stop button or depress the foot control to
start sewing.
Gently guide the fabric along a seam guide line letting
the fabric feed naturally.
q Start/stop button

Securing seams

For fastening the ends of seams, press the reverse
button and sew several reverse stitches.
The machine sews in reverse as long as you press and
hold the reverse button.
w Reverse button
Press the reverse button once when sewing the lock-a-
matic stitch (pattern 01) or locking stitch (pattern
02) and the machine will lock the stitches off and stop
automatically.
Cutting threads
To cut the threads after finishing sewing, press the
thread cutter button. The needle bar automatically rises
after trimming the threads.
After cutting the thread, you can start sewing without
drawing up the bobbin thread.
e Thread cutter button
NOTE:
Use the thread cutter on the face cover to cut
specialized or thick threads (#30 or thicker).
To use the thread cutter on the face cover, remove the
fabric and draw it to the back.
Pull the threads up and slip them between the thread
cutter and face cover from behind.
Pull the threads toward you to cut.
r Thread cutter
27
00 or 03
2 to 6
Zigzag foot A

Advertisement

Table of Contents

This manual is also suitable for:

Experience 560

Comments to this Manuals

Symbols: 0
Latest comments: