Turn OFF the power switch or press the lockout key to
lockout the machine when using the needle threader.
z Lower the presser foot. Press the needle up/down
button q to raise the needle to its highest position.
Press the lockout key or turn the power switch off.
Pull down the needle threader knob w as far as it will
go. The hook e comes out through the needle eye
q Needle up/down button
x Draw the thread from guide (a) r to guide (b) t and
under the hook e. Draw the thread up along the right
side of guide (b) t and slip the thread in between
guide (b) and the holder plate y.
r Guide (a)
t Guide (b)
y Holder plate
c Raise the knob in the direction of the arrow, drawing
the thread loop through the needle.
u Thread loop
v Pull the thread through the needle eye.
The needle threader can be used with a #11 to #16
needle or a blue tipped needle. Thread sizes 50 to 90