Weighing Units; Units - A&D BM series Instruction Manual

5. Weighing Units

Units

5.1.
The units and weighing modes can be selected and stored in the function table as described in
"5.2. Storing Active Units".
The sequence of displaying them can be arranged to fit the frequency of use.
They are stored and are maintained in non-volatile memory, even if the AC adapter is removed.
If the law in your area permits, you may use all of the units. You can disable the units that you
don't regularly use. And you are able to turn them back on.
If a weighing mode (or unit of mass) has been turned off, that mode or unit will be missing in the
sequence. Tael has four varieties, one of which can be selected and installed at the factory.
Press the key to select a unit or mode for weighing.
MODE
For details about the units and modes, see the table below:
Name (unit, mode)
Gram
Milligram
Counting mode
Percent mode
Ounce (Avoir)
Troy Ounce
Metric Carat
Momme
Pennyweight
Grain (UK)
Tael (HK general, Singapore)
Tael (HK jewelry)
Tael (Taiwan)
Tael (China)
Tola (India)
Messghal
Density mode
Density mode
To use the density mode, it must be stored in the function table as described on page 21.
For details about this mode, refer to "14. Density Measurement".
To select the density mode, press the
the unit "g" displayed.
Abbreviation Display unit
g
mg
PC
%
oz
ozt
ct
mom
dwt
GN
tl
t
m
Refer to "14. Density Measurement"
DS
key until the processing indictor
MODE
18
Conversion factor
1 g
0.001 g
-
-
28.349523125 g
31.1034768 g
0.2 g
3.75 g
1.55517384 g
0.06479891 g
37.7994 g
37.429 g
37.5 g
31.25 g
11.6638038 g
4.6875 g
blinks with
BM series