A&D EK-300EP Instruction Manual page 19

4. Press the TARE key several times to display
Cp 3 .
5. Press the ENER key to store the setting.
Cp Hi appears after end
Entering the upper and lower limit values
6. With Cp Hi
Enter the upper limit value using the following keys.
SAMPLE key
TARE key
ENTER key
MODE key
7. With Cp lo
Enter the lower limit value using the following keys.
SAMPLE key
TARE key
ENTER key
MODE key
8. Press the ENTER
after end
9. Press the
weighing mode.
displayed, press the ENTER key.
To select the digit to change
the value (blinking).
To change the value of the
blinking digit. Hold down the
key to switch the polarity.
("N" means negative.)
To store the value and
proceed to the next step.
To cancel the operation and
proceed to the next step.
displayed, press the ENTER key.
To select the digit to change
the value (blinking).
To change the value of the
blinking digit. Hold down the
key to switch the polarity.
("N" means negative.)
To store the value and
proceed to the next step.
To cancel the operation and
proceed to the next step.
Unit
key.
.
MODE key to return to the
.
appears
17
Press
several times
Cp 3
To store
Cp Hi
HI
000000
Set using the
relevant keys
HI
001234
To store
Cp lo
LO
000000
Set using the
relevant keys
LO
001230
To store
end
Unit
Returns to
the weighing mode