Percent Mode (%) - A&D EK-300EP Instruction Manual

7-7. Percent Mode (%)

Displays the weight value in percentage compared to the 100% reference weight.
Selecting the percent mode
1. Press the MODE key to select %. (%: percent)
Storing the 100% reference weight
2. Press the SAMPLE
reference weight storing mode.
3. With nothing on the pan, press the
ZERO/ON:OFF key to display 100 0%.
When using a tare (container), after the above
operation, place the container on the pan and
press the TARE key to display 100 0%.
4. Place the sample to be set as the 100%
reference weight on the pan.
5. Press the
reference weight. Remove the sample.
If the balance judges that the sample weight is

too light and cannot be stored as the 100%
reference weight, it displays lo and returns
to the previous display.
Reading the percentage
6. Place the object to be compared to the 100%
reference weight on the pan. The displayed
percentage is based on the 100% reference
weight.
key to enter the 100%
ENTER key to store the 100%
ZERO
15
0. 0
%
100 -
%
100 0
%
Weighing pan
Sample corresponding
to the 100% weight
To store
100. 0
%
lo
%
Object to be
compared
75. 8
%