Storing Weighing Units - A&D EK-120i Instruction Manual

8-4. Storing weighing units

It is possible to store the weighing units that will be actually used from the units
available. For the units available, see "5-3. Units"
Select and store the weighing units as described below:
1. Press and hold the SAMPLE key to display
func
.
2. Press the SAMPLE key several times to display
Unit
.
3. Press the PRINT key.
4. Press the SAMPLE key to select a weighing unit.
5. Press the RE-ZERO key to store the weighing unit.
6. Repeat steps 4. and 5. to store all weighing units to be
used.
7. Press the PRINT key.
id appears after end
8. Press the
mode.
Note
When the balance is switched on, it starts with
the unit that was stored first at step 5.
MODE key to return to the weighing
.
19
Press and hold
func
Press
several times
Unit
Unit
Each pressing switches
the units available in the
order described on 5-3.
Unit
To store
To confirm
end
id
Returns to
the weighing mode