Weighing Units; Units - A&D GX-M Series Instruction Manual

5.Weighing Units

5-1 Units

With the GX-M /GF-M series balance, the following weighing units and weighing modes are available :
g
kg
Pct
PC
Counting mode
Percent mode
Density mode (To use this mode, it must be stored in the function table as described on
page 15. For details about this mode, refer to "19. DENSITY MEASUREMENT".
page 47.
To select this mode, press the MODE key until the processing indictor
blinks with the unit "g" displayed. "DS" appears only when the density
value is displayed.)
Programmable-unit (No unit displayed. For details, refer to "18. PROGRAMMABLE-UNIT".)
A unit or mode can be selected and stored in the function table as described on page 47.
If a weighing mode (or unit of weight) has been turned off, that mode or unit will be missing in the
sequence. Tael has four varieties, one of which can be selected and installed at the factory.
To select a unit or mode for weighing, press the MODE key.
For details about the units and modes, see the table below:
Name (unit, mode)
Gram
Kilogram
Counting mode
Percent mode
Ounce (Avoir)
Pound
Pound/Ounce
Troy Ounce
Metric Carat
Momme
Pennyweight
Grain (UK)
Tael (HK general, Singapore)
Tael (HK jewelry)
Tael (Taiwan)
Tael (China)
Tola (India)
Messghal
Density mode
(See note below)
Programmable-unit (Multi-unit)
Note: The unit Grain is not available for the GX32001MD and GF32001MD.
Lb
OZ OZ OZt
L
Abbrev. Display
g
kg
p C 5
PCS
%
OZ
Lb
OZ
L
OZt
ct
mom
dwt
GN
TL
to1
tol
MES
DS
is used to
show the density.
MLT
mom dwt
ct
GN
"20. Density Measurement".
"19.Programmable-Unit".)
Function table
(Storing mode)
p C 5
l0
to1
17
TL tol MES DS
Conversion factor
1 g =
1 g
1000 g
28.349523125 g
453.59237 g
1Lb=16 oz,
1 oz=28.349523125 g
31.1034768 g
0.2 g
3.75 g
1.55517384 g
0.06479891 g
37.7994 g
37.429 g
37.5 g
31.25 g
11.6638038 g
4.6875 g
MLT