Hach POLYMETRON 8362 User Manual page 28

Transmitter 9135 - pH measurement in pure water
pH probe (after July 2013)
- Translucent rigid center wire = measuring pH
- Green internal shield = reference
- Yellow external shield = on the shield plate of the transmitter
Temperature sensor
- Brown and white (long) wire = Pt100
- White (short) external shield wire = must be connected on the
transmitter side of the shield plate
Note :
The protective boot filled with KCL (3M) will provide an ideal
storage chamber for long periods. So this one must not be
preserved during more than a year.
Never store your probe in contact with air even if it is in its flow
chamber.
Page 24