Set Turbocell® Type & Reset Average Salt - Hayward AquaRite series Troubleshooting Manual

How To: Set TurboCell Type
Before operation, the AquaRite must be configured to the correct TurboCell installed.
"t-15" is the factory default. If the incorrect cell is chosen the salt level will be
inaccurate and the system will likely suspend chlorination as a result.
Step 1
Start with the main toggle switch in the 'Auto' position.
Step 3
To change cell type, cycle slide switch up to 'Super Chlorinate'.
9
3200
t -3
Step 2
Push the diagnostics button until 't - 15, t - 9, t -5 , t - 3' appears.
Step 4
Return switch to 'AUTO'. Repeat until display shows correct cell.
t -15
t -9