Display Only, Lights Only, Or Neither - Hayward AquaRite series Troubleshooting Manual

4. Display ONLY, Lights ONLY, or Neither

If the power center, displays LEDs ONLY, a Display reading ONLY, or Neither, then the
system is exhibiting a power related symptom. Verify the pump is running AND the
circuit breaker, supplying the AquaRite with power, is ON.
Is the pump running? Is breaker tripped?
Step 4A
Step 4B
Most AquaRite systems are wired into the pump. Verify the breaker, suppling the AquaRite power is in
Which means if the pump is off then the AquaRite will the full ON position. IF unsure OR breaker is ON, please
not have power. IF the pump is ON, go to step 4B. IF the contact service for further assistance (908) 355-7995
pump is NOT on, turn it on and inspect the display. OR follow the link included below.
NEVER remove the dead front of a breaker panel, this should only be done by a licensed
professional. IF unsure which breaker power the AquaRite system please contact a pool
professional for further assistance:
https://www.hayward-pool.com/shop/en/pools/Dealer-Locator
27