Hayward AquaRite series Troubleshooting Manual page 8

How To: Change the Default Display
If the first reading represents a number followed by the letter 'P', then the default
reading has been changed to express the 'Desired Output %'.
Step 1
Step 2
77P
AL-4
To change the default reading back to the average salt, start by When the unit reads 'AL-4' move the switch up to 'Super
pressing the 'Diagnostics' button two times. Chlorinate' and back to 'Auto'.
Step 3 Step 4
3200
AL-0
Continue moving the switch up to 'Super Chlorinate' and back to It takes about 30 seconds for the unit to settle back on the
'Auto' until the display reads 'AL-0'. default reading. It should now reflect the average salt level.
8