Change Metric To Standard & Change Default Reading - Hayward AquaRite series Troubleshooting Manual

How To: Switch from Metric to US Standard
If the first reading (average salt) is displayed in decimal form instead of a number
represented in thousands, then the unit has been set to 'Metric Mode'.
Step 1
Step 2
3. 2 0
30
To change the unit from Metric Mode to US Standard, start by Once showing the temperature in Celsius, move the switch up to
pressing the 'Diagnostics' button one time.
'Super Chlorinate' then back to 'Auto'.
Step 3 Step 4
3200
86
Immediately the temperature reading should change to reflect a After 30 seconds the unit should settle back to the default
Fahrenheit value. If it does not repeat step 2. reading. The reading should now reflect a number in thousands.
NOTE: The process is the same to go from US Standard to Metric.
7