JUKI AMB-289 Engineer's Manual page 92

If the screen below is displayed, quickly
turn OFF the power and perform the set-
up again after checking [Checking items]
below.
Data writing abnormal screen
Checking items
1 Smart media cover is opened during the data communication from the smart media.
2 Data of the smart media is not correct. Or, there is no data file.
3 Contact of the smart media is dirty. Contact is defective.
(Caution) Do not turn OFF the power and close/open the smart media cover during the work.
The main unit may be broken.
d
Screen during data writing
− 88 −
Screen of end of data writing
The procedure above completes
the replacing work of application
software.